Skip to main content

Reply to "Is there reason why a newer DCS remote would not power up? Thought it was eating batteries but after testing am not sure"

Be very careful if you decide to open the remote.  Not only taking both halves apart, but there is very little clearance between various parts because of short wire lengths.  There just may be a solder joint problem.  Your best bet is get the remote to an MTH tech.  You may have a problem with the transceiver board.

Bruce

Last edited by bruce benzie

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×