Skip to main content

Reply to "ITADs and Making Your Own"

I put a signal relay together for a friend's  setup.  I have actually been able to put both an Arduino and IR board under the track.  I drilled two small holes for the LEDs to poke through and hot glued it on.  I also drilled a tiny hole for the sensitivity screw.  I don't really have good pictures.  I used a plasticville  tower for the relay and VR. IMG_3346IMG_1388

Attachments

Images (2)
  • IMG_3346: To the left you can see the IR board and the arduino is under the styrene guard
  • IMG_1388: Tower containing the relay and VR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×