Skip to main content

Reply to "JLC Big Boy smoke unit"

I don't think that this will add anything new but I post it for the sake of completeness.

The guidance I got on replacing the AC regulator came from Mike Reagan himself and was given back in 2011. He said:

"The AC Reg consists of 4-5 wires that need to be cut and spliced and soldered and covered with shrink tubing. The wire designations are on the PVCB, under the heat shrink wrapper. The board must be screwed to the frame and electrically isolated from the frame too."

I partly cut away the wrapper to see the wire designations and then sealed it up again. The regulator I got back then did not have the triac outside the wrapper any more than the ones I got later. 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×