I am installing a Operating Milk Loading Depot made by K-Line. This is the one with a conveyor that loads the milk cans into the milk car. It comes with a switch (see pic). I do not like manual buttons on my layout so I am attempting to put the "buttons" to control the belt conveyor and man ejector and on my Legacy 990 remote using my Lionel TMC ASC (Accessory Switch Controller)(6-14182). Has anyone tried to eliminate the switch that comes with the Creamery and use their Legacy remote?
So far here is how it works?
1. The switch has an on - off switch for the belt conveyor (once you power it up) you click the switch on, the conveyor moves and the light comes on inside. You then switch the conveyor off with the switch.
2. Once the milk can which is loaded from the belt, goes inside, you depress a momentary button, the light comes back on and the man loads (or ejects) the can into the proper designated milk car.
My thoughts are to use 2 acc buttons on my legacy remote (5) & (6). 5 would operate the conveyor and 6 would operate the man. I can't get it to work using the switch, or by passing the switch.
See diagram on how it is suppose to be wired up using the switch. Any help would greatly be appreciated. Thanks in advance.... Brian 
