Skip to main content

Reply to "K-Line Lionel 6-22660 Moose Pond Creamery Operating Milk Loading DEPOT O Gauge"

Ok.

I got an answer.  Yes.  My legacy remote is set to ACC 5 which gives the switch power.  I by passed the on and off switch and the momentary switches with a jumper for each.  I attached an off/on toggle switch on the jumper.  When the switch is on for the belt, the switch must be off for the eject man.  When the switch is on for the eject man, the switch must be off for the belt.  You can run both, but it robs the unit of power, and why would you want to run both at the same time.  So it works like this:

1.  Switch the toggle switch on for the belt.  Turn on your Legacy remote and select ACC 5.  Aux 1 begins movement of the belt, pushing the milk cans to the eject man inside.  Once accomplished release Aux 1 and it turns off. Place the toggle switch in the off position for the belt.

2. Switch the toggle switch on for the eject man. Turn on the legacy remote and select ACC 5 again. Hit the Aux 1 key which sets the man in motion with the milk can entering it into the milk car.  Once accomplished release Aux 1 and it resets and turns off.  Place the toggle switch in the off position.  Done.

What is nice is that you can walk over the the creamery and walk around.  Not having to stay in a fixed position holding down a button.   

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×