@George A Werderich posted:Hello guys
I need to aquire that connector and pins. I don’t know if I need the male connector on engine yet. It is a moot point if I can’t rebuild the tether. The wires were burned as was some of plastic in connector housing. I think that is still usable. I have not been able to extract two of the six pins from connector, so I need both pins female and connector for tether. If male pins and another connector for engine are available I would buy both. If someone has those to sell I would be grateful. Gwerderich@aol.com
If you need the board and socket on the locomotive your best bet is brasseur’s electric trains. I bought one from them. Unless you want to get into making your own board or trying to replace the socket housing. It would be a little involed with six points on the board. Brasseurs may still have some 6 wire tethers too but when I was looking, they didn’t have one with the wire positions I needed but you can just buy the df11 sockets listed above and modify.
If your locomotive plug is good or you can find a replacement but can’t find a tether, let me know. I can check to see if I have any extras.
