@George A Werderich posted:Hello guys
I need to aquire that connector and pins. I don’t know if I need the male connector on engine yet. It is a moot point if I can’t rebuild the tether. The wires were burned as was some of plastic in connector housing. I think that is still usable. I have not been able to extract two of the six pins from connector, so I need both pins female and connector for tether. If male pins and another connector for engine are available I would buy both. If someone has those to sell I would be grateful. Gwerderich@aol.com
Looks like no one has the correct Hirose connector but these should fit and easy to solder wires too, no crimp tool needed. You just have to be careful when you plug it in the orientation is correct as the key is different.
https://www.digikey.com/en/pro.../M22-7140342/2264338
Pete