Scott,
One thing the Korber instructions don't make clear is the difficulty in adding flooring to the RH if you don't place it the recommended greatest distance from the turntable. At the greatest distance, all of the stall tracks go into the RH, and to the back wall, in a generally straight line, making any floor cuts relatively easy. At any shorter distances, you will have to use flex-track to maintain a roughly equal distance between stall tracks within the RH or you will find your stall tracks getting very close to the outer walls for the first and last stalls. This makes cutting any flooring that more difficult, and trying to make the flooring actually touch the outside edge of the stall rails (covering the outside edges of the ties) becomes terribly difficult. Just something to think about.
Chuck
