Skip to main content

Reply to "KW Transformer not doing the job"

That is your only fixed voltage choice with a KW - 6 v or 20v - if you are running trains with A-U & B-U.

If the 4090 was connected to the rest of the layout using "U" to the center rail and the common "A" to outside rails, the the 4090 was providing 16v to the whistle. If you run trains with the KW only on A-U, then you can connect the whistle to "B" and set it at 16 volts(or whatever level you wish for satisfactory operation) to duplicate the 4090 setup.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×