@Blake Morris posted:I just installed a sensor on an O60 curve and it works great. Only this is that the instructions state that two screws are supposed to be included with the sled cover, however, there wasn’t any. Anyone else missing some screws? LOL
Blake
The screws were missing with mine, too. I called Lionel last week and they ‘re going to send me the four screws (two for each sensor cover/sled). It may be that at some point in the development/production process, they were just forgotten about.
Something else that seems “amiss” is that the green LED that illuminates for Program is next to the Record button—and vice versa. If this was intentional, it’s counterintuitive and confusing. I expected the LED for each button to be next to the button it’s for—not next to the other button. The instructions are not helpful with this. They just refer to the Program LED and the Record LED, and don’t mention the color. I figured it out by looking at a photo of the original SensorTrack, which showed the green LED next to the Program button and the red LED next to the Record button. I emailed Lionel for an explanation for what seems like an odd setup; am awaiting a reply.
