For a single loop of FasTrack around the perimeter and a CW-80 powering it, if your CW is in the middle of the edge of the 25' side you could get away with a pair of 27' wires to the far side and a pair of 2' wires to the near side track, both sets connected to the binding posts on the CW. 54' + 4' = 58'. If your track "dogbones" back to the transformer side of the table to run parallel to the front track, you could probably use a pair of 2' wires & a pair of 3' wires with slack to spare for a total of 10 feet.
|