Dave Olson posted:Volphin posted:The club's LCS module is completely non responsive. I think this happened after we ditched our Z4K and blocked our layout into 3 zones, each powered by a 180w brick and Legacy Powermaster. The LCS is hooked to the common rail, as is the 990. The LCS is also connected to the 990 base with the supplied DB9 connector cable and to PDI connector on the LCS. (Have tried both PDI ports BTW).
Assuming you're talking about the WiFi module as you mentioned access point. There are lots of LCS modules.
How do you have the WiFi module connected to the common of the track? It only connects to the PDI connector of the y-cable that plugs into the Base and has the power supply that plugs into the wall.
When the module powers up, does the red light come on for a second before going off and then the green light flashes?
Hi Dave, thanks for responding. After re reading my post, I can see the confusion.
This is the LCS wifi unit. The 990 is hooked to the outside rail, not the LCS. On power, the green light flickers for an instant and then no lights, no transmission at all. Maybe I need to re seat the DB9 cable on the back of the 990? I find it hard to believe we have had a cable failure, but odder things have happened. Anything else I can check?
