I run both, Legacy (CAB2) and DCSI wasn't sure whether to post this in the DCS forum or this one. Here's my issue. Prior to upgrading my DCS Remote and TIU to 6.1 two accessories that run off the SER2 (serial port) of the LCS worked perfectly. The AMC/AC Log Loader (6-24115) and the AMC/ARC Gantry Crane (6-24206). After the upgrade, neither accessory responded to my CAB2. They worked using the controllers, but not the CAB2. The LED flashes on the controller when sending commands from the CAB2 but, for example, the crane does not move. I have the Gantry Crane paired with the Crane Sounds Work House which works fine...it plays the corresponding sound from the command given by the CAB2. The LCS modules flash according to the manuals as they should...everything else works fine; I checked the wires running from the SER2 to the accessories and everything is connected as it should be. I did a factory reset on the crane and reassigned the TMCC ID#. Nothing. Is it possible the TIU upgrade vesion 6.1 screwed up the serial port/output somehow? Interestingly, the crane works using the LCS WiFi app, full functionality; Log Loader will move logs to the staging area but will not dump the logs using the WiFi App. I can't figure out what to do next to fix this issue. Help appreciated. Thanks.
Original Post
