Skip to main content

Reply to "LED lighting for passenger cars"

GRG

I'm about to install LED reel strip lighting in several O scale 2 rail passenger cars.  One of Gun Runner John's LED regulators will be used to drive an 18 LED lighting strip.  The railroad is DCC powered with a nominal 16V square wave AC on the rails.  I'd like to dim the lights further than the regulators can achieve with its on board potentiometer.  In a workbench test I found a by connecting a 1300 ohm resistor between the regulator and the track power I can get the intensity I want. 

Question:  Is there a preference whether the added resistance is upstream or downstream of the regulator? 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×