Skip to main content

Reply to "LED lighting for passenger cars"

Thanks John - as you recommended putting a 1k ohm resistor in parallel with the regulator's output to the LED lighting strip provided full range lighting control and anti-flicker protection using regulator's  potentiometer.  The resistor can be soldered across the tabs anywhere along the strip.  As you suggested doing it on the end of the LED strip was easiest.   

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×