Skip to main content

Reply to "LED 's for RK switches ?"

HEY STAN,

The plastic housing on these bulbs cause only occasional issues with fitment . The MTH lot numbers seem to be the issues . Some of the OEM bulb basses where not easily fit from one switch to another .  There were 3 years from the beginning of switch buying til present of the 17 presently.

The components of the LED bulbs were not glued in , only an interference fit.

The LED was damaged by me . I actually had a small horizontal wire cutter that I used to chew 

the plastic base away.   I soldered the component to the bulb .   I used a Dremel fine point diamond bit to make room in the OEM housing to be able to install the bulb unit.  It now resides in a light socket with the other 59 LEDs in the switches and lockons.    

This has been another interesting project.

Thanks for your curiosity in the LED internals Stan.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×