gunrunnerjohn posted:
To summarize:
Select: Slower Engine ID
Activate: AUX2 + AUX2 + AUX2 + AUX2
Nudge: BOOST to speed up, Brake to slow down
Save: Horn
To clear the nudge settings, select the speed step (32 or 100) on the “nudged” loco.
Note: the “nudge” selection is stored until changed, and survives power cycling.
IMPORTANT POINT: Note that by selecting a new speed step mode you are clearing the nudge settings!
Those are the directions in the manual also. I will call 3rd rail. Thanks for your help.