Everyone's giving you all this information, but your main issue is the fact that when the engine runs over the sensor track, the green light does not flash. That means it is not doing anything and not reading the engine.
Also, the only manual thing you have to do when using a Sensor track to load info, is set the engine ID to the number you want. Nothing else.
I set my ID, then run over the track and it all programs in by itself. You do NOT need to select engine type or anything. That is what the track reads from the engine.
Key thing to look for. When you power up your track, the sensor track light should flash for a second indicating it has power and was found.
If it does not, you first need to find out why the track is not working. Check your PDI cable connection, they can come loose very easily.
