Skip to main content

Reply to "Legacy dummy from Legacy powered"

Success!  There are 4 screws on the top of the truck that hold a plate in place.  Once the plate is removed I removed the pieces shown in the attached picture.  The engine has sound, smoke and lights.  It behaves just like a powered unit when configured in a train. The motors spin at the same speed as the powered engines in the consist.  I was a little worried that since the motor is missing the linkage at the bottom that it might vibrate, but it seems like the motors are secured to something inside the body. 

If I run it as a rear DPU and want to have either the forward or reverse headlight light, I don't configured it with the train, but address the engine separately to turn on which ever headlight I want.  The throttle on the engine in that case needs to be at least speed step 1 to turn off the cab light.  The ditch lights and ground lights can be turned off using the Cab2.  The sounds and smoke would also need to be set manually.

Thanks for all the suggestions.

Attachments

Images (1)
  • IMG_0183 (2)

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×