Skip to main content

Reply to "Legacy Not Recognizing New Engines"

Thanks, guys.  I'd been able to load the info off the orange chips w/out issue (tho for some reason I don't see any option for the doghouse light w/the Y6 under the AUX 1 menu).  CW80 must be what I have transformer-wise (I knew it was something "80").  Def. thinking powerhouse & powermaster for when I take the loop (hopefully w/additions) downstairs for Christmas (I've got a thread on this under the Plans & Layout forum, FWIW). 

 

Additionally, for some reason when I do the PE GP-7, even after successfully assigning the engine & loading the Railsounds chip the CAB-2 goes into CAB-1 mode for this engine.  None of the crewtalk sounds play, either.  I'm almost certain I threw the switch to Railsounds (RS) from SS on the bottom of the engine, but will double check after work today.  Should I just delete this engine & re-load all over again, or is there a simpler fix? 

 

Thanks again, to all, for your assistance.

 

- Neal

 

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×