Skip to main content

Reply to "Legacy/TMCC question"

Originally Posted by Hot Water:

The Legacy "system", i.e. Legacy base AND the Cab 2 controller, provide MANY more "speed steps" (128, if my memory serves) over the standard of 32 with the original TMCC base & Cab 1.

 

Thus ALL TMCC equipped models operated MUCH smoother, with finer control, regardless of  which licensed supplier of TMCC control system is installed in any of the models.

Uhh... this isn't really true.  A standard TMCC locomotive only responds to 32 steps, there is no way it'll run 128 steps without some different upgrade boards or a firmware upgrade (which does not exist).

 

The ERR Cruise Commander M upgrade will update a TMCC locomotive with modular electronics to 100 steps, and a Legacy locomotive has 200 steps.

 

One thing for conventional operators is the TPU in conjunction with the Legacy controller offers finer control than the PowerMaster, or at least that's what has been said.  Since I don't run conventional, I've never tested this capability.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×