@stangtrain posted:First, the bridge was held in place with cabinet latch magnets which were wired at one end for power to the center rail and outside rail power at the other end. You can see the wire soldered to the magnet housing in one of the pictures. The other end (metal plate to which the magnet attaches) is soldered to and wired to the bridge track.
That cabinet latch magnet system is slick. At first, I thought, "How do you connect the outside rail?", but then I realized you said you used another cabinet latch magnet on other end for the outside rail -- so they are off set. Brilliant. I'm going to try that on my lift outs. I currently have a lift out that's wired just on one end and my lift out sits below, tethered by the wires. But this eliminates the wiring entirely and allows you to set the lift out anywhere. Thanks for sharing this!
Mike
