Skip to main content

Reply to "Linkage/Timing"

Agree with all the above. Let's assume ( very tricky word) you mounted the wheels correctly; if the motor is a type 8 in that the armature can be easily removed, it's possible that in mounting the wheels you got one set (front or back) off sync by a tooth or two, that's relatively easy to fix by pulling the armature, rotate one set to correct tooth sync. The case may be the same with different motor types such as type 7 just a bit more involved because you can't remove the armature. Then you'll have to spread one set of wheels enough to rotate to the correct tooth and press back together. All the above is for double intermediate geared motors and definitely check the rod mounting as you go.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×