Skip to main content

Reply to "LionChief Curcuit Board with 4 Ohm load?"

@Craftech posted:

LionChief 0-8-0 too quiet, barely audible especially with 2nd loco especially on FasTrack.

Tender barely has enough headroom for a baffle.  I made one anyway and drilled a few extra speaker holes in the bottom because Lionel mounted the speaker off center from the grill holes.

Barely a difference in volume.

I have a 30mm 8 ohm speaker which I could mount up inside of the coal load facing upward.  Small holes drilled in the black coal load are not noticeable.  I have confirmed this with an HO installation I did a few months ago.   I want to hook this up in parallel to the existing 8 ohm speaker.

What I don't know is if the resulting 4 ohm load will damage the LionChief circuit board.

Anyone know?

Thanks,

John

I don't know if this would work in your case but in the American Flyer Flyerchief engines I have I pulled the stock speaker and replaced it with the Fatboy speaker included with the sound boards that ERR sold, that made a vast improvement.

Ray

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×