Skip to main content

Reply to "Lionchief plus gp20: horn sound volume less than bell and announcements"

Note, if using the Universal orange remote, the volume adjustment instructions are different as is the way you activate the front and rear elecocouplers when compared side by side to the functionality of the original OEM blue remotes that came with the earlier Lionchief Plus RF (non-bluetooth ) engines.

The volume adjustment trigger is pressing the middle button for crew dialog and holding it until the engine makes a beep and then continue holding the middle screw talk button while turning the speed dial on the remote clockwise for louder. The engine will continue to make beeps as you turn the dial just so you know you are in volume adjustment mode. Releasing the middle crew talk button then locks in the new volume setting and you have to return the speed dial to middle neutral to again control engine speed.

Also, I mentioned it but the universal remote also uses the middle crew talk button as a "shift" button such that belll and horn buttons + shift (crew talk)  fires the elecrocoupler on a Lionchief Plus engine.  This is again different action than the original remote where rapid double tap of the bell o horn button was how you activated electrocouplers.

Last edited by Vernon Barry

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×