I’m sorry but they had to reload my email profile at work last month and I lost a ton of archive email messages. If you look at the board where the connector is for the front headlight, you’ll see an empty position on the connector and I believe RL stenciled on the board for rear lamp. The connector is the most common connector for just about everything I see in locomotives and ERR upgrade kits. I simply stole a pin from a donor connector and installed it in the existing connector, spliced a lead to it and into the common and routed it out the back, through the connector in the attached photo which I stole from an MTH dummy locomotive lighting kit and into the tender. I really didn’t need the diagram in the first place. Hope this helps!
|