Skip to main content

Reply to "Lionel 180 Watt Power Supply"

mokemike posted:

Can a Lionel 180 Watt Power supply be used as a stand alone power source when connected to a terminal block to power either TMCC, Legacy or DCS engines without using a TPC or ZW controller? It has a on/off switch and a circuit breaker.

Thanks.  mokemike

Hope this helps answer your questions:

TMCC/Legacy.  You can cut off the PH180's plug and use a regular lockon to connect directly to the track.  No need for a PM, TPC or new ZW if not running conventional.  If you don't want to cut off the plug, use either the TMCC Direct Lockon which accepts the plug

picture TMCC Direct Lockon

or the TMCC TPC Cable set for other connections.

picture TMCC TPC Cable Set

The TMCC Direct Lockon is NOT recommended with DCS since it messes with the DCS signal.

For DCS.  Again, you can cut off the PH180's plug and wire it to a terminal of the TIU or use the TPC cable set and connect that to the TIU.  

Attachments

Images (2)
  • picture TMCC Direct Lockon
  • picture TMCC TPC Cable Set

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×