Skip to main content

Reply to "Lionel 2026 Operation"

The auto reverse has the lever so the operator can turn it off and run it in one direction only. The lever should be snug. If nothing is broken such as the fibre contact board, you can try to crimp the eyelet holding the lever on by using a very thin needle nose pliers and gently wiggling them into place enough to crimp the eyelet. The only other solution is to totally remove the e-unit, completely disassemble it, then separate the frame so you can remove the coil and use an eyelet crimping tool. If you break the fibre board or the spring washer or eyelet are shot, you ban buy a rebuild kit.

There is no need to disconnect the smoker. If its burnt out, its not using any power any way. If it is, then after some time it will start producing smoke. In any case, it should be taken apart and cleaned. You can get the original ceramic style hot plate and the gaskets from Jeff Kane. Or, if you wanted to use liquid smoke fluid, you can purchase a complete conversion rebuild kit.

Tin

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×