Skip to main content

Reply to "Lionel 2026 Operation"

Another E-unit trick is to hold the contact arm tight with a pair of needle nose pliers after moving the lever 90 degrees to the left so the short part of the arm is above the coil bracket and the bent the arm inwards so there is a slight bow to it. this will put more pressure on the arm against the fiberboard and the lever will not be so sloppy.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×