Skip to main content

Reply to "Lionel 28068 (Rio Grande Hudson Jr.) Signal Sounds Tender - No Chuff or Talk"

If the Cab number is 2001, then the loco was delivered as a command ready engine, meaning only conventional control of the reverse unit and only Signalsounds in the tender (whistle/bell only). The tender can be upgraded to have Railsounds using the following two PCB's;

691RSPRA01 (RS Power board)

691PCB1060 (Railsounds audio board)

You will need to pop the shell of the loco and move the jumper for the chuff signal to make it back through the tether (as well as insert the green wire from the tender tether to the 4-position Leoco connector on the RS motherboard) for the chuffing to work properly. The manual you downloaded was like the "command controlled" version and not the conventional version.

Thanks,

Mike

Lionel

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×