Skip to main content

Reply to "lionel 456-19 coal ramp hookup"

In the controller the three connections you indicated just go to push buttons that tie them to 12 to 14 volt power.  If you are running this with other modern equipment, you should read some of the posts about TVS.  Be sure all the terminals go to momentary power sources or you could burn up the coils.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×