Skip to main content

Reply to "Lionel 464 Sawmill improvements and modifications"

I had the usual problems with jamming.  I made my own boards by copying a single Lionel board I had - the dimensions have to be very close or they will jam.  I also put a small chamfer on the ends of the logs.  I can look for specs on the motor I used, but if I were doing it again I would use a different motor that could be direct drive to the belt cog.   I will get some finished pictures of my sawmill up soon.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×