Skip to main content

Reply to "Lionel 48W Whistle Station Armature Bearings"

Thanks so much for this crucial info.  I checked the hole in the brushplate and found there was only a modest amount of play in the armature shaft.  I decided to go ahead and clean the commutator, brushes and brush tubes with CRC, and lubricate the bearing points.  Now the motor runs quite well and the whistles sounds remarkably good!  A successful repair.  Thanks again for your help.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×