Howard Reed posted:I purchased one of these ramps about a year after they came out. I had some problems with it and I figured out what the problem was and fixed it. I then posted what I did here on the forum. However, I do not think that thread still exists, so I am reposting my post here. Also I used 18 volts with this accessory.
So here is my original post:
Lionel’s 456R coal ramp coupling solution!
"................................."
I hope this repost will help.
Thanks alot for this info, I too was using the old "ram it back" along with the 0-5-0 coupling method, and was wondering if there was a way to smooth the coupling action, as it were.