Skip to main content

Reply to "Lionel 6-18135 NYC Century Club diesel"

This set was moisture damaged. The box to the non powered unit especially. There is nothing wrong with my Legacy or Command Control systems. I took the unit back apart,and pulled all the boards again. The R2LC board had evidence  of mildew on the back of it. I used tuner cleaner on all the board contacts. And plugged them in, and unplugged the a few times to self clean. And pulled all the plugs again to self clean. The antenna is fine and it will accept programming. The headlight and coupler works. The diesel engine sound works in Command and conventional. The horn works in conventional only with my ZW transformer. I could not test the bell. I am assuming that either the R2LC board is damaged or the sound chips need to be removed and clean the contacts. DOES ANYONE KNOW WHERE I CAN BUY THE TOOL TO REMOVE THE SOUND CHIPS. Thank you guys for all your input.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×