Skip to main content

Reply to "Lionel 6-18135 NYC Century Club diesel"

Have you tried a reset/restore of the R2LC? The correct code is a 6.

If the above doesn't work, my guess is that the sound board isn't seeing the serial line from the R2LC. Problem could be the R2LC, the sound board, or the motherboard that connects everything.

I'd recommend trying to identify the specific problem before purchasing boards blindly. The best way to do this is to swap boards from a loco that you know works. Just about any R2LC will work (C6-C13, and make sure to reset/restore to a 6) and while that loco is RailSounds 3, you can substitute RailSounds 4 boards in their place but you MUST replace both the RailSounds and power supply boards at the same time.

TRW

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×