I use a 10" straight section of fastrack. Then I cut a 4" section off K&S precision metals #9882 angled brass and file it smooth on ends. Next, I drill two 3/32" holes in the brass section 3/4" from each end. I line up the first hole 3 and 1/2" from the end with the connecting plate so the hole goes through that plate(9 ties) and drill the second hole on the track where the brass second hole lines up. Finally just screw a #4x3/8 screw in each hole to fasten the brass. You can make three sections of track with each K&S brass piece.
|