Reprogram the locomotive properly.
STEP 1: Move switch on locomotive from run to program.
STEP 2: Turn on Command Base.
STEP 3: Place locomotive on track, then turn on power to track.
STEP 4: Press “ENG” then input locomotive ID#. Press “SET”.
STEP 5: Press ”ENG” then input locomotive ID# again.
STEP 6: Press “AUX 1”, then "74".
STEP 7: Turn off power to track, wait ten seconds.
STEP 8: Remove locomotive from track, move switch from program to run.
STEP 9: Place locomotive back on track. Turn power on to track.
STEP 10: Press “ENG” and ID#, then operate as normal.