@Rhinoh posted:Where should I put the leads? On the screws holding the element to the board?
Yep,…but first do as John stated and check to make sure the screws are tight,….watch as you attempt to tighten the screws if they’re loose. The screw can try and drag the element lead and twist it if you’re not careful, and beings yours is nice and crispy, it could crunch it up,….so just try and snug up the screws good, but don’t give it 3 grunts ….in fact, nothing gets 3 grunts,….maybe a 1/4 grunt at most,….😝😝😝
Pat