Skip to main content

Reply to "Lionel & MTH Connector Crimper"

BobbyD posted:
gunrunnerjohn posted:

That does look good Matt, it also has the larger and next size smaller crimp, it should work with the 1mm terminals for PS/3 connectors.   I ordered one, we'll see if I like it better than the PA-09.

Now that we have the tool(s), a good source for a crimp connector assortment? Thanks!

The connector pins are specific to your application, so if you want stuff for all the possible connectors this tool handles, you'll have a room full of connectors and contacts!

Figure out what you need and buy the specific connector pins and shells for the application.

For Lionel, I keep JST-EH, JST-PH, and JST-ZH connectors and pins.   If you want to make connectors for the Lionel LCS cables, they Molex Pico-Spox 1.5mm connectors.  MTH uses HiRose DF-11 and DF-3 connectors, depending on whether it's the 3V board or the 5V board.  The 1mm connectors for PS/3 are Chyao Shiunn JS-1253 & JS-1254 connectors.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×