Skip to main content

Reply to "Lionel B-6 Switcher"

Jeff2035 posted:

John, please let us know how you squeezed in the LCRU2 into the B6 and/or tender (which has Railsounds board/speaker).

PieceAcake, I'm gonna loose the e-unit and a chunk of lead. I really did not plan to open the loco just yet but Jeff, just for you !  Attached are three photos you can see the LCRU2 fits on it's side between the gear box and the smoke unit. I will make a new heat sink and put a layer of foam tape on the bottom to hold the thing in place.  In one of the photos I am showing the gear box cover I made. The blade of the knife is resting on the cover. I am not going to pull the cover off and count the teeth now you will have till I get to this project. Tried to spin the armature and count the turns but turning it with a Q-Tip is just too slow.  J102_6474102_6480102_6476

Attachments

Images (3)
  • 102_6474
  • 102_6480
  • 102_6476

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×