Skip to main content

Reply to "Lionel Barrel Loader Accessory; Using it with a Lionel Barrel Ramp Operating Car"

Mike H Mottler posted:

Reply to all ...

Good suggestions - thanks to all "first responders."

Some responders recommended an older-style OTC activating device, which by design makes contact with only ONE of the sliding shoes of the car as it rests on a "regular" track section.  I use Lionel O-gauge tubular track, so I hope I can find an OTC device (or two) with the O-gauge brass track clips intact. If I find them, I intend to use the Lionel #90 control button to activate the OTCs.

With appreciation,

Mike Mottler  (ritrainguy)
mottlerm@gmail.com

Mike,

Piece of cake. The OTCs are easy to find. Check with Hennings Trains, a forum sponsor. I believe I bought mine from them via their eBay site. They come with the clips.

And, yes, as I posted above in the picture I really like the #90 for unloading the barrel car. These give you finer "touch and feel" control when unloading compared to a standard on/off type switch.

Last edited by johnstrains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×