First time user here. I have the Lionel Command Control Culvert Unloader #345 (6-82030) and the Culvert Loader #342 (6-82029) with the Command Control Plug-Expand-Play system that I am trying to set up. It says that you can connect it to a traditional O/O27 track lock-on or to an accessory power supply. I have it connected to an 18VAC accessory power supply using the Lionel 3-pin female pigtail (6-82038) per their instructions, using only the red and black wires. The white wire in unused. I am using Lionel 3 rail tubular track. There is a switch on the back for program and run. I have it set to run. When I turn on the power, the lights on the Unloader crossbeam blink continuously. When I move the gondola in to break the beam, nothing happens. The instructions talk about programing the Unloader and Loader using a Cab-1, Cab-1L or Legacy remote. However, I do not have a Lionel system. I am running an MTH DCS Explorer system. What do I need to do to get these working? Can I run them the conventional way without the command control? Do I need to purchase a Lionel system? If so, what is the cheapest option? I sent an email to Lionel Support over a week ago, but I have not received a response. Thanks for all your help.
Original Post
