Skip to main content

Reply to "Lionel Command R27 switches"

I took the bottom of the R27 Command switch that has an electrically dead rail on the diverging route and found that a spot weld that attaches that rail to a copper strip that routes power to the rail had broken.  If you have a meter, you might consider taking the bottom off the dead switches and see if you can locate an electrical connection problem.

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×