I use Fastrack switches on my seasonal layout with few problems. In fact, the 0-72 size has been the most reliable. The only problem I have seen is that the end of the throw somtimes needs to be bent slightly towards the main rail. The top edge to the throw can also be bent down in the direction of the main rail slighly to reduce the gap. There is a video on YouTube that shows how to make these adjustments. I would not send these back if this is the issue because it is a minor problem that is easily corrected. I have had other issues with derailments when the switches are too close together, especially with steam engines with straight wheel allignments. A short straight 4.5 or 5.0 inch section between the switches helps a lot. Hope that helps. I have 14 Fastrack switches working right now on my layout with no issues and ten of them are 0-72.
|
|
