Skip to main content

Lionel Fastrack Command Switch 6-81953 Issue

I bought a bunch of new 6-81952/53 switches at York and one of them has an issue.  One LH 6-81953 switch will not accept programming.  When I depress the programming switch button, the lamp never blinks (stays lit), so I cannot program it.  Default SW #1 doesn't work, either.

I took the base off, and nothing out of the ordinary looked wrong.  depressing the switch gave correct continuity.  I decided to take the small PWB shown in the photo below (plagerized photo from GRJ) off a good switch and swap it with this.  In doing so, the bad switch was now able to be programmed to a new switch number.  I then put both switches back together.  This temporarily solved my problem, as now I could address all switches, but would like to fix properly.

Does anyone know the P/N for this small PWB and where to get it from?  I couldn't find anything on Lionel parts site, or on Brasseur's.

Thanks, Dave

Attachments

Images (1)
  • mceclip0
Original Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×