@John H posted:He is only adding a second power track, so no need to isolate. A second power pack should be isolated, but would not increase any voltage.
@R Timothy posted:... I was curious if I could use a second fastrack power track with the power pack it comes with to increase the power on my layout?
@Keith Crook 020419 posted:Make sure to isolate the track between the two power blocks. Fastrack has two pieces, 1 3/8” and 5” isolated block, that will separate the center rails. You don’t want to apply too much voltage to the track and damage your engines.
He will be adding power(watts), not voltage, in this parallel scheme. No need to isolate for these power levels.
@M. Mitchell Marmel posted:I'd recommend placing the power feeds at opposite ends of the layout. T
Mitch is right - place each pack at distance on the layout to enhance power distribution.