@gunrunnerjohn posted:Given that it's only one channel, it's very likely that it's the DCS signal generation and not anything to do directly with Legacy.
GRJ, Is this a possible issue with the TIU that needs repaired like rplst8 stated, or is it just a matter of trying to improve the signal on that channel with the 18 volt bulb etc. What was the issue in the TIU that caused signal problems on Fixed Output 2 only and what is the fix? Is the fact that I get good signal on that channel when the Legacy Base is not plugged in still indicative of a low DCS signal generation. I will try to test that channel a little more today and see if the signal remains strong without the Legacy Base plugged in or if it fluctuates. Anything else I should be looking out for? Thanks.
Michael