Skip to main content

Reply to "Lionel Legacy failure - seeking ideas"

First, the red light on the Base2 should blink when you send a command from the Cab2 (like turning the red knob on the Cab2) indicating that communication from Cab2 to Base2 is working. If the red light doesn't blink, you may need to check/fix the channel the Base2 is set to, and the channel the Cab2 is set to, to make sure they match. Procedure is on Page 78 of the Legacy v1.6 manual.

If you don't have the Legacy manual, you can download here https://www.lionelsupport.com/legacy-control-software

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
×