pennsyforever posted:Dear J DADDY:
1. The lead A unit with sound takes a unique program ID number and works fine, until the power is turned off. If the power is turned off, I cannot tell you what it reverts to. All I know is that it will not take a command with the ID assigned. So I start all over again by reprograming it.
2. Once the track power is cut, the lead A unit with sound will not start up at all if power is returned, until it is reprogramed. I don't run conventional so I can't tell you what it would do in conventional.
3. The two PB units and the non-voiced A unit are working with the original IDs I programed them with. I have not tried to program new IDs. If it aint broke, don't fix has been my approach. That is, I can power down the track and power up, and they (PBs and non-voiced A) take full commands.
4. One of the PBs with acting like the lead A unit, but the problem went away yesterday on its own. Since that time, it has been working perfectly.
5. Also, I have not tried them in a lash up.
Pennsyforever
Pop the lids and see if your antenna is floating around in the housing.
